JBL VRX392LAP Pair – Yamaha DXS18XLF Pair Rental – 12-Inch 2-Way Powered Line-Array System / 1600W 18″ Powered Subwoofer

Description

Rental Includes:

2 x JBL VRX392LAP
2 x Yamaha DXS18XLF
2 x Subpole
2 x IEC Cord
2 x PowerCON
4 x XLR Cable

Rentals are for a 24 hr period.
Call for discounted multiple-day options.

Optional Additional Services:

Delivery & Pickup options are available (Shipping is NOT available for Rental products)

– Please note that we can only provide services within a 20-mile radius of the NYC metro area.

If you need help producing your event, give us a call. Schedule a Free walkthrough for your next event, and let us help you take it to the next level.

Please contact us at 212-925-6575 ext:215 or ext:223 for all rentals.

The JBL VRX932LAP is a powered, lightweight, compact 12″ two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn’t call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.

Features:

Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
JBL’s exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
Constant Curvature waveguide for unprecedented array coherence.
Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
Array Configuration Selector permits “array shading”.

Specifications:

Power Rating: 1750 Watts Peak 875 Watts Continuous
Frequency Range: 57 Hz – 20 kHz(-10 dB)
Dimensions(H x W x D): 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in)
Frequency Response: 75 Hz – 20 Hz (+/-3db)
Maximum Peak Output: 136 dB SPL at 1m
Coverage Pattern: 100 x 15 nominal
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) LF: 750 Watts, HF: 125 Watts
DPC-2 Output Section: LF: Dual-Bridged Technology™, Class D
Audio Input Connector: XLR with loop through
LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
User Controls: Input Attenuator (0-16 dB)
Signal Processings: DSP based, resident in Input Module
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements 6A per system at 120V, 3A per system at 240V
Enclosure: 25/15 mm, 11-ply birch plywood
Suspension / Mounting Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
Finish Black DuraFlex™ finish
Grille Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
Net Weight: 24 kg (52 lb)
Optional Accessories: VRX-AF: Suspension array frame

DXS XLF subwoofers are also driven by 96kHz high power DSP processors and utilize the dynamic EQ.

Onboard D-XSUB LF processing gives you total management of your lower frequencies with NORMAL mode set for ideally balanced low-frequency response, while BOOST mode provides a tighter and more focused bass with some extra punch. XTENDED LF mode drops the low-end frequencies down even further for thunderous bottom end that delivers a low frequency extension unheard of from a cabinet of this size. Usually the higher the output, the more difficult it is to manage low frequency energy directivity, and significant stage-side sound pressure levels can seriously sabotage your monitoring, but with DXS XLF setups consisting of two or more subwoofers, selecting the Cardioid Mode effectively decreases the sound pressure on stage while increasing the bottom-end output directed towards the audience, resulting in a much cleaner stage monitoring environment. Without a doubt, your DZR full-range system will reach new performance heights when used with the pronounced, powerful lows of DXS XLF active subwoofers.

Just like the DZR Series, each DXS XLF model comes in a Dante-equipped “D” version enabling smart system integration with Yamaha consoles and other Dante devices via the Dante I/O (2in/2out) which also features SRC (sample rate conversion) allowing 48kHz device compatibility. Patching is simplified considerably with Yamaha CL/QL digital mixing consoles from the I/O device display, while TF console users can select Quick Config for surprisingly fast, easy set up and operation of a sophisticated sound reinforcement system. Combining the Analog I/O with Dante I/O opens up countless routing and system configuration options, while the Dante break-IN and break-OUT function can add even more flexibility by acting as a simple I/O box. What’s more, Yamaha’s customizable control panel software “ProVisionare Control” for windows and “ProVisionare Touch” for iPad are also Dante compatible, adding more simple remote management of your sound reinforcement system.

New Yamaha proprietary transducers with a durable die cast aluminum frame and 4” voice coil are crucial to achieving such impressive low frequency response, even at the highest output levels. A dual damper also helps to realize extraordinarily high linearity of the low frequencies by mitigating unwanted vibration during extreme output levels.

DXS XLF enclosure exteriors feature a durable Polyurea coating with extremely high damage resistance to protect the cabinet from scratches, bumps, or severe weather conditions, maintaining a professional appearance for years to come. Additionally, the new, easy-to-grip aluminum handle, optional SPW1 wheel kit, and SPCVR speaker covers provide additional safety, portability, and peace of mind when you’re on the road.

• Speaker type: Powered Subwoofer, bass-reflex
• Frequency range (-10dB): 30Hz – 150Hz
• Components LF: 18″ Cone, 4″ Voice Coil, Ferrite magnet
• Sampling frequency rate Internal: 96kHz and FIR Filter
• A/D D/A Converters: 96kHz AD/DA
• Maximum output level (1m; on axis): 136dB SPL *1
• Power rating-
• Dynamic: 1600W *2
• Burst (20ms): 1300W
• Continuous: 1200W
• I/O Connectors-
• Analog I/O: Analog IN: Combo x2, Line level (Maximum +24dBu),
• Input impedance 20kΩ, Analog OUT: XLR3-32 x2, CH1/2: THRU or DSP OUT
• USB2.0 Host 5V 500mA for USB memory DATA storage/load IEC AC inlet x1 (V-Lock)
• Amplifier class: Class-D
• Cooling: Fan cooling, Variable speeds
• Power consumption: 40W (Idle), 180W (1/8)
• Handle: Aluminium die-cast, Side x2
• Dimensions:
  W- 550 mm (21.7″)
  H- 657 mm (25.9″) (with rubber feet)
  D- 720 mm (28.3″)
• Net weight: 48.9kg (107.8lbs)
• Options: Cover: SPCVR-DXS18X, Caster: SPW-1
• Others: Enclosure Material, Finish, Color: Plywood, Durable Polyurea Painting, Black
• Pole socket: 35 mm (depth 80mm), M20 Threaded (depth 25mm)